1buycart Digital Stepper Motor Driver 2 Phase 16 Subdivisions Currents Step Controller AC20‑110V DC20‑160V

Giới thiệu 1buycart Digital Stepper Motor Driver 2 Phase 16 Subdivisions Currents Step Controller AC20‑110V DC20‑160V

✌ large-scale Discount Voucher Code！！Enter a discount code to buy more offers！✍
☚ All ready stock !! ☛=
☜ High quality product ☝
☟ Good packaging ✌
We will arrange 24 hours shipping asap！Fast delivery (from China) 5 to 12 business days after shipment(except some special holidays).
♔ ♕ ♖ ☻
Feature:
1. Multi Usage: Suitable for 86 flange 4 wire, 6 wire, 8 wire two phase stepping motor. Built in PI control algorithm, with low noise, vibration and heat. Support single end, pulse and direction, dual pulse signal input.
2. 16 Options: There are 16 kinds of subdivision, 16 kinds of current for selection, the default maximum subdivision is 128, and the output current is up to 8.2A, which will be halved after 1s of standstill.
3. Direct Input: Pulse, direction and enable terminal have constant current input function, can directly connect input signal without additional series resistance for voltage reduction and current limited protection.
4. Safety Protection: With the functions of overvoltage and undervoltage alarm, phase current overcurrent protection, motor phase open circuit detection, etc.
5. Wide Voltage Range: Support AC20 to 110V, DC20V to 160V power supply, feature optical isolation differential signal input, with maximum input pulse frequency of 300KHz.
Specification:
Item Type: Digital Stepper Motor Driver
Material: ABS
Description
Minimum Value
Typical Value
Maximum Value
Unit
Output Current (Peak Value)
2.2
-
8.2
A
Supply Voltage
20
80
110
VAC
20
90
160
VDC
Control Signal Current
5
10
20
mA
Step Pulse Frequency
-
300
KHz
Step Pulse Width
2
-
-
us
Direction Signal Width
100
-
-
us
Undervoltage Protection Point
-
7.5
-
VDC
Overvoltage Protection Point
-
170
-
VDC
Drive Initialization Time
2
-
-
S
Insulation Resistance
500
ΜΩ
Package List:
1 x Digital Stepper Motor Driver
Note:
1. The AC input voltage shall not exceed AC110V.
2. DC input voltage shall not exceed DC160V.
3. The green indicator PWR lights up when the drive is powered on.
How to Use
The driver can select the operating current and subdivision through the dial switch. There are 16 kinds of subdivision and 16 kinds of current for selection. With overvoltage, undervoltage, phase current and total electric overcurrent protection. Its input and output control signals are optoelectronic isolated.

Hình ảnh sản phẩm

Giá BTRFLY