1buycart Stepper Motor Driver TMC2226 256 Microstep Low Noise with Heatsink 3D Printer Accessory
Mô tả ngắn
Máy Tính & Laptop > Máy In, Máy Scan & Máy Chiếu > Máy In 3D > 1buycart Stepper Motor Driver TMC2226 256 Microstep Low Noise with Heatsink 3D Printer Accessory
- Giao hàng toàn quốc
- Được kiểm tra hàng
- Thanh toán khi nhận hàng
- Chất lượng, Uy tín
- 7 ngày đổi trả dễ dàng
- Hỗ trợ xuất hóa đơn đỏ
Sản phẩm tương tự
Giới thiệu 1buycart Stepper Motor Driver TMC2226 256 Microstep Low Noise with Heatsink 3D Printer Accessory
✌ large-scale Discount Voucher Code！！Enter a discount code to buy more offers！✍☚ All ready stock !! ☛=
☜ High quality product ☝
☟ Good packaging ✌
We will arrange 24 hours shipping asap！Fast delivery (from China) 5 to 12 business days after shipment(except some special holidays).
♔ ♕ ♖ ☻
Feature:
1. 256 Micro Steps: Low in working noises, the internal 16 steps of the stepper motor driver chip is expanded to 256 subdivisions.
2. Driving Current: Larger driving current, the maximum peak current can get to 2.5A, and the stable printing current can get to 1.7A.
3. Stables Working: Comes with a heatsink, the step motor driver module enables good heat dissipation for higher working stability.
4. Perfect Fitting: Supports UART mode, the motor drive board is applicable to for MKS SGEN-L without jumper, useful and reliable.
5. Easy to Install: Designed to have a light weight and a compact size as well, the TMC2226 motor driver is very simple to install.
Specification:
Item Type: Stepper Motor Driver
Material: Aluminum Alloy
Output Current: 1.78A
Recommended Working Current: 0.8A
Microstep: 256 microstep subdivision
Configuration: STEP, DIR OR UART.
Load Driving Voltage Range: 5.5~38V
IC Logic Working Voltage: 3V, 5V.
Package List:
1 x
Stepper Motor Driver1 x Heatsink
How to Use
1. Please pay special attention to the driving direction, and do not plug it reversely.
2. Do not connect the motor when measuring the voltage, otherwise it is easy to burn the motor.
3. When measuring the voltage, connect the power supply, not just USB power supply.
4. When using on the printer control board, please keep 3pcs jumper cap under the socket.
5. Before adjusting the knob, it must be carried out power off. After the adjustment is completed, the power on measurement shall be carried out to prevent the drive or main board from burning out.
6. When pasting the heat sink, please pay attention to the distance between the heat sink and the pin, or it will cause a short circuit between the heat sink and the leading angle.
7. During working, please do a good job in heat dissipation, such as heat sink and cooling fan, to prevent the abnormal operation of overheating drive.
Hình ảnh sản phẩm
Giá SCS