1buycart1 Switch Control Relay Independent Outputs for Roller Lind Door

Giới thiệu 1buycart1 Switch Control Relay Independent Outputs for Roller Lind Door

✌ large-scale Discount Voucher Code！！Enter a discount code to buy more offers！✍
☚ All ready stock !! ☛=
☜ High quality product ☝
☟ Good packaging ✌
We will arrange 24 hours shipping asap！Fast delivery (from China) 5 to 12 business days after shipment(except some special holidays).
♔ ♕ ♖ ☻
1. INDEPENDENT SWITCH AND APPLICATION: Each relay has a set of normally open (normally closed) contacts, very suitable for direct control of various loads.
2. ADVANCED TECHNOLOGY: The switch uses learning code coding technology (space to code), no direction, switch interference.
3. WORKING MODE: Self lock, interlock, click user free adjustment, can realize one control or more control one.
4. RECOMMENDED POWER SUPPLY: The control switch DC regulated power supply of more than 500mA.
5. MAXMIUM 10 A CURRENT: Receiving plate can withstand 10A current per circuit, can directly drive DC and AC load.
6. WIDE APPLICATION: Suitable for burglar alarm, control electric doors and Windows, signal control, industrial control, lifting equipment, etc.

Specification:
Item Type: Switch
Material: ABS
Working Voltage: 220V
Maximum Load: 10A Relay, Resistive Load ≤8A, Inductive Load ≤3A
Channel: 1CH
Operating Frequency: 433MHZ
Receiver Sensitivity: -105dB
Operating Temperature: -10℃-+60℃
Output Mode: Instantaneous, Switch, Lock Adjustment by Jumper
Codes Type: Add Controller by Learning Codes Through the Learn Button on the Receiver
Control Built in Button Battery: 2 x CR2016(75mah) 

How to Use:
Output status:
It is adjusted by the jumper on the receiver board, (prior to change. You need to turn off the power. Please turn on the power again before changing the power, otherwise the status will not change)
A: Instant: Hang the jumper on the M and G.
B: Toggle switch: Set the jumper to the T and G position
C: locking: connect the jumper wire properly or place the jumper wire on any pin.
Instantaneous: press the transmitter button A, receiver relay A is connected, release button A; Receiver relay A is disconnected,
Switch: press transmitter button A once, receiver relay A will open, press button A again, receiver relay A will close,
Lock: press transmitter button A, receiver relay A is connected, press transmitter button B, relay A is disconnected.
Learning methods:
Input AC220V for receiver. Press the study button until the Led light comes on. Then press the transmitter, and the Led indicator blinks quickly, indicating successful learning.
Clearing Codes:
Press and hold the learn button on the receiver until the LED indicator goes off to indicate that the codes has been successfully cleared.

Package List:
1 x Relay1 x Plastic Box
1 x Controller

Hình ảnh sản phẩm

Giá XHI