2 đèn pha chống sương mù COB LED 12V siêu sáng cho xe hơi

Giới thiệu 2 đèn pha chống sương mù COB LED 12V siêu sáng cho xe hơi

Specifications
Supper bright,Plug & play, No need to cut wires, no need ballasts, but No Canbus Function.
1. Light Power: 72W/Kit
2. Lumen Flux : 8000LM/kit
3. Voltage: DC 12-24V
4. LED Quantity(each bulb): 2 pcs* COB Chips
5 .Material:Aluminum PCB and PA66+30% GF Plastic
6. Bulb Size: 880(881,H27), 9004(HB1), 9005(HB3, H10), 9006(HB4, 9012), 9007(HB5 ),H1, H3, H4(HB2), H7, H11(H8, H9,)
7. Light Source Mode:High Quality COB Chip
8.Sealed Housing:Dust Proof and Water Resistant
9. Beam Angle: 360 Beam Angle 2 pcs chips
270 low beam & 360 high beam 3pcs chips
10. Color Temperature: 6000K-6500K White HeadLamps as daylight XENON HID
11. Heat Dissipation Theory:Aviation aluminum 6063T5 including Turbo cool fan
12. Operating Life: >30000hrs
13. Operating Temperature: -40 - +80 C
14.Connector Type:Plug and Play
15.Waterproof Rating:IP68 Waterproof
16. Application: Headlamp, Fog light,High beam,Low beam
15.Certifications: CE, RoHS, ISO9002, IP68

Package Content:
2 x High Power LED Headlight Bulbs

Product Advantages:
1.Super bright COB chip,360 degree clear beam no blind zone.
2.Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light.
3.All-in-one aluminum profile as heat conduction system,360 degree heat radiating +high speed mute fan system keep the light bulb in appropriate working temperature.
4.Built-in constant current CPU,instant full brightness without start-up relay.
5.High speed mute fan(15000R/Min),high Air flow for faster cooling rate.
6.Product structure:Frosted heatsink which designed with radiation heat dissipation and cooling paint; Tiny installation size with 360 degree adjustable socket for more vehicles.

Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Normal Problem
1.both side could not work?
please turn around the plug (swap the polarity) and try again
2.One side could not work?
1)please turn around the plug (swap the polarity) of the defective bulb and try again
2)please exchange the bulbs from side to side and see if the problem could solve
3)Please check your connection and fuse
4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
3.both side flicker/interference/error light?
You car need a r #Silver #S2 #glare #H15

Hình ảnh sản phẩm

Giá AU