Giới thiệu Bơm nước usc600 DC 12V cho hệ thống làm mát CPU 132.09 GPH
100% brand new and high quality
Features: High efficiency,energy saving,ultra-quiet design,high lift&heavy traffic,durable&good insulation. With ceramic bearing and graphite axle sleeve,long working life,super silent. Best Performance for diy a quiet water cooling set to cool down your CPU at average temperature. Widly used for pets, evaporative cooler, to circulate R V. antifreeze, for hydroponic systems and many other applications. Water Pump only,other accessories demo in the picture are not included!
Tips: 1.Working at rated voltage (DC12V/0.8A).The positive pole is red wire,the negative pole is black wire,white wire is test wire. 2.This pump is centrifugal pump,it can't vent the air automatically,so it must be operated by submersible installation.(If outside water installation,you should make sure it is installed below the liquid surface) 3.No water idling during use. 4.When blocking, long-running is not allowed. 5.Preventing any hard particles entering the pumps. 6.Ceramic bearing, graphite sleeve,very quiet.
Specification: Type: Water Cooling Systems Model: SC600 Motherboard: Small 3 Pin Plug Voltage: DC12V Current: 0.8A Power: 10W Inlet and Outlet: 1/4 Internal Thread Head: 3m/118.11in Flow Rate: 500 L/H(132.09 GPH) Maximum Size: 9x8x6cm(3.54x3.15x2.36in) Quantity: 1 Pc
Note: 1.No retail package.No fitting. 2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!