Feature: 1. Can be set to start and stop the humidity 2. Display and control can be controlled to 0.1 degrees 3. Imported wet probe, non-ordinary wet-sensitive resistance 4. This section uses multi-threaded IC humidity measurement, high precision 5. Installation Convenient wiring is simple, high precision and long life 6. Cheap, completely replace the mechanical humidity switch!
Description: Moisture range:00%~99%RH Humidity control precision:0.1% RH Load Power: 12v 120w output type:Direct output Size:60*45*31mm Output voltage = input voltage 10A
How to use: 1.Connect to power supply , diplay Instructions humidity 2.Set start the humidity: Press the UP button display start the humidity , long press about 3s the start the humidity flashing , then press the UP or Down adjust the set 3.Set to stop the humidity:Press the Down button display Stop the humidity , long press about 3s the Stop the humidity flashing , then press the UP or Down adjust the set Restore the factory Settings: press the UP and Down button at the same time , will display 888 then will Automatically detect the humidity
Note: Size for manual measurement, there may be a 0 to 2mm error, belongs to the normal phenomenon.
Package include ; 1pc Digital Humidity Controller 1pc SHT20 Humidity Sensor