Bộ Dụng Cụ Hàn Điện 30W Chất Lượng Cao Chuyên Dụng
Mô tả ngắn
Dụng cụ và thiết bị tiện ích > Dụng cụ điện và thiết bị lớn > Thiết bị khác > Bộ Dụng Cụ Hàn Điện 30W Chất Lượng Cao Chuyên Dụng
- Giao hàng toàn quốc
- Được kiểm tra hàng
- Thanh toán khi nhận hàng
- Chất lượng, Uy tín
- 7 ngày đổi trả dễ dàng
- Hỗ trợ xuất hóa đơn đỏ
Giới thiệu Bộ Dụng Cụ Hàn Điện 30W Chất Lượng Cao Chuyên Dụng
Product parameterInternal heating
Product Brand: Mingmen Welders
Product name: 806 internal heating electric soldering iron
Whole machine weight: 160g
Product material: plastic, silicone, stainless steel
Working temperature: 200450°c
Product power: 60W
Operating voltage: 220V
Heating core: ceramic heating core
Warm-up time: 18 seconds
Ceramic heating core heats from inside to outside
Maintenance of electric soldering iron
Choose the right tin wire
When soldering, you should use 63%-37% lead content solder, and often use a tin layer to protect the soldering iron tip. Besides
The thicker tin wire should also be used for welding work, because the thicker tin wire has better protection for the soldering iron tip.
2
Keep the soldering iron head clean
Use a moist special cleaning sponge to wipe off the flux, old tin and oxide on the soldering iron tip. After each use,
Be sure to clean the oxide on the soldering iron tip, and then add new tin to the tin-plated layer of the soldering iron tip
3
A layer of tin is often applied to the surface of the soldering iron tip
This can reduce the chance of oxidation of the soldering iron tip and make the soldering iron tip more durable. After use, the humidity of the soldering iron should be reduced slightly
Only apply a new tin layer to make the tin-plated layer achieve better oxidation resistance.
4
Place the soldering iron on the soldering iron rack
When the soldering iron is not needed, the soldering iron should be carefully placed on a suitable soldering iron stand to prevent the soldering iron from being damaged by collision.
5
Instant cleaning of oxides
When part of the tin-plated layer contains black oxide or rust, it is possible that the soldering iron tip cannot be tinned and cannot be soldered.
Jobs. If it is found that the tin-plated layer has black oxide and cannot be tinned, it must be cleaned immediately.
6
Choose flux with low activity
Active or corrosive flux will accelerate the corrosion of the soldering iron tip when heated. Therefore, low-corrosive flux must be selected when welding
Package:：
5 x Soldering Iron Tips(1 x pointed head;1 x round pointed head;1 x cutter head;1 x the horseshoe head;1 x flat head).
Hình ảnh sản phẩm
Giá GDT