FLYSKY Bộ 2 Ăng Ten Tăng Cường Tín Hiệu Cho DJI Mavic Mini Pro 2 Air SPARK FIMI X8SE Hubsan Zino Drone Radiolink

Giới thiệu FLYSKY Bộ 2 Ăng Ten Tăng Cường Tín Hiệu Cho DJI Mavic Mini Pro 2 Air SPARK FIMI X8SE Hubsan Zino Drone Radiolink

The signal booster antenna of the remote controller is small and easy to carry, the weight is about 8g, and the lightweight design makes it easy for customers to carry and store. Using ABS and pure , anodized, enhanced texture, wear resistance, corrosion resistance. Easy to install and disassemble, no need to change the control, non-destructive installation design, do not worry about damaging the remote control.

Features:
The signal is everything, aerial photography is no longer NG. Enhance the antenna signal, after actual measurement, it could effectively extend the remote control distance, and the transmission distance will be longer.
Effective size: 15x6mm. Applicable remote control: FIMI X8SE, DJI  phantom series, Hubsan zino, etc. Effective size: 14x4mm. Applicable remote control: Mavic series drone(except AIR 2). Effective size: 14x9mm. Applicable remote control: radiolink, flysky, frsky, Wfly.
Wide range of using, suitable for most mainstream remote controls on the market. According to the size of the remote control antenna, the user could choose to replace the silicone fixing sleeve with a suitable size.
With the addition of the Yagi antenna, the signal has unidirectional directivity，and the antenna needs to be pointed toward the aircraft to avoid obstructing the remote control and avoid flying in severe interference areas.
If there are any problems, please contact our store in time. We will give you a satisfactory solution. Thanks for your understanding.
Specification:
Name: Signal booster
Material: ABS and pure , silicone
Quantity: 2pcs
Antenna extends the controlling distance: 500-3000m
Suitable for: FIMI X8SE, DJI  phantom series, Hubsan zino, radiolink, flysky,frsky, Wfly remote controller, etc.
Size: 87*60mm
Installation Steps:
[1] As shown, take out the antenna and the silicone fixing sleeve, align the protruding part of the silicone fixing sleeve with the vacant part of the antenna groove.
[2] First, snap one side of the silicone fixing sleeve into the hole reserved for the antenna, and then squeeze the other side upward.
[3] The installation is complete, and the other one is installed by repeating the previous steps
[4] Take out the remote control and install the antenna with the silicone fixing sleeve. Snap into the antenna of the remote control.
[5] The installation is complete.
Package Information:
Package size: 9.5*6.5*3.2cm
Package weight: 47g
Gift Box Package 
Packing list:
2 * Signal booster
6* Silicone fixing sleeve

Hình ảnh sản phẩm

Giá KTON