Máy Phun Sương Làm Ẩm Không Khí Jp1 Có Đèn Led

Giới thiệu Máy Phun Sương Làm Ẩm Không Khí Jp1 Có Đèn Led

Specifications:

Material: ABS / PP / silicone gel / electronic components
Working voltage: DC5V
Working current: 400mA
Use power: 1.5W
Spray volume: 40mL / H
Water tank capacity: 220mL
Use time: 5-10h
Product weight: about 100g
Product size: 80 * 80 * 103mm
Packing size: 88 * 88 * 108mm

Product instructions:
Spray instructions: Turn on the power, click the button to turn on the continuous spray mode; click again to turn on the intermittent spray mode to spray for 4 seconds and stop for 6 seconds. Click the button a third time to turn off all spray modes.
2. Night light operation: Press and hold the button for 2 seconds to turn on the night light; press and hold the button again to turn off the night light.
3. Anti-dry burning: All spray modes are set to automatically power off for 4 hours, and can be restarted to continue to use.
4. First use: Fill it with water (about 90%) and let it stand for 3-5 minutes before turning it on.

Tips:
1. Do not pierce the atomizing sheet of the spray port
2. Please take out the cotton swab for the first time, (be careful not to lose the spring), soak it in the water for 1-2 minutes to allow the cotton swab to absorb enough water, and then install it.
3. Only use tap water or mineral water, not pure water. Essential oil can be added by mixing with water
, Just add a little bit

Hình ảnh sản phẩm

Giá OL