Mini Usb Blaster Programmer For Altera With Cable For CPLD FPGA NIOS JTAG Altera Programmer For Arduino Diy Electronic Kit

Giới thiệu Mini Usb Blaster Programmer For Altera With Cable For CPLD FPGA NIOS JTAG Altera Programmer For Arduino Diy Electronic Kit

Welcome to our shop 👑Kingzizi👑, all the products in this shop are at a favorable price💕, and have quality assurance💕, you can rest assured to buy💕, we will give you the best and highest quality shopping experience! 🌹🌹🌹


USB Blaster (ALTERA CPLD/FPGA Programmer)
Description:

1. Support 1.5V,1.8V,2.5V,3.5V and 5.0V.

2. Support all ALTERA products : CPLD ( MAX3000, MAX7000, MAX9000 and MAX II ) ; FPGA ( Stratix, StratixII, Cyclone, CycloneII, ACEX 1K, APEX20K and FLEX 10K ) ;Active serial configuration device (EPCS1, EPCS4, EPCS16)

---- Now we have tested chip using this tool is: Cyclone (EP1C3, EP1C6, EP1C12, EP1C20) ; Cyclone II (EP2C5, EP2C8, EP2C35) ; Stratix (EP1S10, EP1S20, EP1S25) ; Stratix II(EP2S60) ; FLEX10K(EPF10K10, EPF0K30) ; ACEX1K(EP1K30) ; MAX7000(MAX7128SLC84, MAX7128) ; AETC100(MAX3000, MAX3128) ; MAXII(MAXII240, MAXII570, MAXII1270) ; EPCS(EPCS1, EPCS4, EPCS16) ; EPC(EPC1, EPC4)

3. Support AS, PS and JTAG program ( with Verify and BankCheck function) .

---- When we tested the chip above , we use the different program mode: JTAG ( Cyclone, CycloneII, Stratix II, Flex10K, Acex1K, Max7000 and Max3000) ; AS ( EPCS1, EPCS4, EPCS16 ) ; PS ( Stratix , Stratix GX )

4. Support embedded logic analyzer function of SignalTapII

5. Support NIOS II communication and debugger-- When you use it to debug your Black Gold , it will not Pop-up warning

6. Faster -- about 6 times than ByteblasterII

7. USB interface ! -- you don\'t need a PC with serial port now

8. 100% compatible with Official ALTERA USB Blaster



Package Included:

1 XUSB Blaster

1 X USB cable

1 X 10pin JTAGE cable

#USB Blaster (ALTERA CPLD/FPGA Programmer) for arduino

Hình ảnh sản phẩm

Giá TOR