Mô-Đun Cảm Biến Ánh Sáng

Giới thiệu Mô-Đun Cảm Biến Ánh Sáng

Photosensitive resistor Light Sensor Analog Grayscale Sensor Board line finder tracking module

Product description
The grayscale sensor is an analog sensor. It can be used in combination with the Ard-uino sensor expansion board v5.0 to sense the different colors of the ground or the desktop and generate corresponding signals. It can realize interactive works related to color, and can also be used as a tour of the patrol car. Grayscale recognition of the field sensor or soccer robot. The power supply needs to be the same as the controller, usually 3.3V or 5V.

Specifications
Working voltage: 3.3V or 5V
Working current :<20ma
Operating temperature range: -10 ° C ~ +70 ° C
Detection resolution: 10%
Interface type: analog signal output
Size: 23mm x 21mm
Weight: 3g
Interface definition
OUT: signal output
VCC: Power Supply (VCC)
GND: Ground (GND)
Instructions
Working principle
The gradation sensor comprises a white high-brightness light-emitting diode and a photoresistor. Since the light returned by the light-emitting diode on different gradation papers is different, the photoresistor receives the returned light, and the photoresistor is different according to the intensity of the light. The resistance values are also different, thereby realizing the test of the gray value.

Programming principle
The grayscale sensor has three pins, which are the power supply positive Vcc, the power supply ground GND, and the signal terminal OUT. In actual use, the sensor can be directly connected to the analog interface of the Ard-uino controller, for example, the analog port A0, after the Ard-uino is powered on. The sensor white highlight LED lights up, the sensor button is placed on different gray paper, the data is read by the AD conversion of the Ard-uino controller, and then the measured analog quantity is printed through the serial port.

Connection diagram
The OUT port is connected to the analog input pin of the controller. Connect 5V and GND to the +5V and GND of the power supply, respectively.

Sample program
Connect the grayscale sensor to the Ard-uino UNO controller according to the program and observe the value of the serial port output under different gray values.

Void setup() { Serial.begin(9600); //Open the serial port and set the serial port baud rate to 9600bps } void loop() { int val; val=analogRead(0); //Connect the grayscale sensor to the analog interface 0 Serial.print("Grayscale is "); / / print the analog value Serial.println (val, DEC) read through the serial port; / / print the analog value delayed through the serial port (100);



Before purchase:
1. All the goods are in stock and we will dispatch immediately if we receive the order.
2.Use the vouchers for more saving.

Shipment：
1.1-2 days to ship(except for the pro-order item)

After purchase:
1.If you are satisfied，please give us 5 stars praise.



#Photosensitive #resistor #Light #Sensor #Analog #Grayscale #Sensor #Board #line #finder #tracking #modulet

Hình ảnh sản phẩm

Giá GTC