Mô Đun Cảm Biến Khoảng Cách Bằng Tia Laser Vl53L1X 400cm Cjmcu-531

Giới thiệu Mô Đun Cảm Biến Khoảng Cách Bằng Tia Laser Vl53L1X 400cm Cjmcu-531

VL53L1X Laser Ranging Flight Time Sensor Module Distance 400cm Measurement Extension Board Module CJMCU-531

Features:
Made of high quality material, solid, durable and good performance, long service life.
SPAD (single photon avalanche diode) receive array with integrated lens.
Low-Power microcontrollers run advanced digital firmware.
Pin compatible with VL53L0X flight sense ranging sensor, but not compatible with the program.
Fast and accurate long distance ranging, and distance measurement up to 400 cm, ranging frequency up to 50 Hz.
27°typical full field of view.
Receive programmable programmable area of interest (ROI) size on the array, allowing sensor FoV to be reduced.
Receive programmable ROI locations on the array to provide multi-zone operational control of the host.
I2C interface (up to 400 kHz).
Shutdown and interrupt pins.

Size: app.2.5 x 1.07 x 0.32cm/0.98 x 0.42 x 0.13in

Description:
Ranging measurements are available through the sensors I²C (TWI) interface, which is also used to configure sensor settings,
and the sensor provides two additional pins: a shutdown input and an interrupt output.
The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.
It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V.
Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.

PIN Description:
VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator,
you can instead use this pin as a 2.8 V input with VIN disconnected.)
VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I²C lines high to this level.
GND The ground (0 V) connection for your power supply. Your I²C control source must also share a common ground with this board.
SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V
SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V
XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low
puts the sensor into hardware standby. This input is not level-shifted.



Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.Use the vouchers for more saving.

Shipment：
1.1-2 days to ship(except for the pro-order item)

After purchase:
1.If you are satisfied，please give us 5 stars praise.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems.



#VL53L1X #Laser #Ranging #Flight #Time #Sensor #Module #Distance #400cm #Measurement #Extension #Board #Module #CJMCU-531

Hình ảnh sản phẩm

Giá MAJOR