móc lớn, móc treo tường, móc treo tường tự dính liền mạch, móc treo bằng thép không gỉ hạng nặng được nâng cấp, móc chải lớn liền mạch không thấm nước
móc lớn, móc treo tường, móc treo tường tự dính liền mạch, móc treo bằng thép không gỉ hạng nặng được nâng cấp, móc chải lớn liền mạch không thấm nước
Mô tả ngắn
Nhà Cửa & Đời Sống > Sắp xếp nhà cửa > Móc treo & Chốt và móc > móc lớn, móc treo tường, móc treo tường tự dính liền mạch, móc treo bằng thép không gỉ hạng nặng được nâng cấp, móc chải lớn liền mạch không thấm nước
Giới thiệu móc lớn, móc treo tường, móc treo tường tự dính liền mạch, móc treo bằng thép không gỉ hạng nặng được nâng cấp, móc chải lớn liền mạch không thấm nước
Product description
Product category: stainless steel hook Color: brushed big hook, transparent big hook,Crystal glue hook,Pattern hook Material: Stainless steel size:7cm*7cm Maximum load: 15kg Style: Single hook Style: Rural Applicable scenarios: kitchen, bathroom, balcony, etc.
How to use ? 1. Clean the surface of the place where the hook is to be pasted, keep it away from oil/dust/water. Keep dry before sticking to it. 2. Peel off the lid from the protrusions and do not touch the adhesive surface. Press down the base of the hook to make it firmly contact from the middle to the edge, remove the air, and ensure that the base of the hook is completely attached to the surface. 3. Test whether the hand is really stable enough, and then hang the object after a few hours (it will be better after 24 hours).
prompt 1. Before relocating the hook, if the dust covers the dust, clean the adhesive surface with water. 2. Do not use high temperatures exceeding 80 degrees. 3. Do not hang overweight and dangerous fragile objects on it. 4. If the sticky dirt on the hook is not good, please clean and dry after returning to the original viscosity. 5. Please use the hook for at least 24 hours, the heavy-duty command hook will be stronger. 6. In fact, adhesive hooks are very friendly to most wall surfaces, but painted walls, wallpaper walls and plaster walls are limited: you can use these hooks to hang light objects on the wall, but it is not recommended to do so;
How to remove and reuse the glue hook? 1. Use a hair dryer to blow hot air towards the hook glue, and then easily peel off the corner of the hook to slowly remove the hook. There is no trace and it will not damage the wall. 2. Clean the dust on the surface of the hook with water, then dry it with a blower, and then place the hook on the desired position again. ⚡🔥Please visit our shop to see all our products for amazing low prices! 💯👌 🛒 Shop with us to save money! 🛍️💰