Giới thiệu Soyoung Fuel Tank Sending Unit High Accuracy Resistance Type Level Sensor 316 Stainless Steel 0‑190 Ohms for Ships RV Yachts
★★★★★★★ Chào mừng bạn đến cửa hàng của tôi ★★★★★★★
Trong cửa hàng của chúng tôi, bạn sẽ
♥ Tận hưởng dịch vụ tốt nhất
♥ Nhận sản phẩm tốt nhất.
Chúng tôi có
♥ Sản phẩm chất lượng tốt nhất,
♥ Hậu cần kịp thời nhất,
♥ Giá cả phải chăng nhất.
Tôi hy vọng rằng bạn có một trải nghiệm mua sắm khó quên, đừng quên chú ý đến chúng tôi, sự hỗ trợ của bạn là động lực lớn nhất của chúng tôi !!! 1. Circular Float: The fuel level transmitter is circular floating design, with excellent reed switch, durable and reliable, and will not damage moving parts. 2. Applicable Range: The fuel level sensor is applicable to 110-125mm water tank, suitable for ships, yachts, recreational vehicles, trucks and other equipments. 3. Easy Installation: Reed tube and fixed resistor, with SAE 5 hole installation mode, equipped with gasket and screws, convenient for installation and removal. 4. High Accuracy: The output signal is European standard 0‑190 ohms, 0 ohms at no load and 190 ohms at full load, the sensor has high resolution and accuracy. 5. For Marine Use: The fuel water level sensor has IP67 protection grade, applicable to most marine equipment, can be used in various environments.
Specification: Item Type: Fuel Level Sensor Body Material: 316 Stainless Steel Cable Material: PVC Float Material: NBR Installation Method: Standard SAE 5 Hole Type Screw Size: M5 x 0.8 Aperture: Approx. 5mm / 0.2in Specification: Approx. 100mm / 4in Recommended Water Tank Size: Approx. 110-125mm / 4.35-5in Output Signal: EU standard 0-190 ohms (0 ohms at no load, 190 ohms at full load) Resolution Range: 10mm Fuel Water Level Sensor Type: Resistance Alarm Switch Rated Current: 500mA Protection Grade: IP67 Operating Temperature: -40℉ to 185℉ (-40℃ to 85℃) Application: Ships, yachts, cars, trucks, RV
Package List: 1 x Fuel Level Sensor5 x Screws 1 x Gasket
Note: In order to prevent the transmitter from touching the tank bottom, if it is a plastic tank, the length of the transmitter shall be 1 inch less than the tank depth, and if it is a plastic tank, it shall be 0.5 inch less than the tank depth.