Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử

Máy Tính & Laptop > Phụ Kiện Máy Tính > Bộ chia cổng USB & Đọc thẻ nhớ > Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
  • Giao hàng toàn quốc
  • Được kiểm tra hàng
  • Thanh toán khi nhận hàng
  • Chất lượng, Uy tín
  • 7 ngày đổi trả dễ dàng
  • Hỗ trợ xuất hóa đơn đỏ

Giới thiệu Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử

Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử

Thẻ nhớ CF-Compact Flash Card công nghiệp 256MB thương hiệu Swissbit (Made in Germany), dùng cho máy CNC, máy tính công nghiệp, thiết bị điện tử, PLC…
- Sử dụng chạy chương trình, boot hệ điều hành windows, linux, ubuntu…
- Bộ nhớ SLC, độ bền cao, hoạt động trong môi trường công nghiệp (chịu nhiệt độ cao, chống sốc, chống rung, tự sửa lỗi….)

Thẻ còn đẹp như hàng mới
- Dung lương: 256MB
* Đầu đọc thẻ nhớ, Áo thẻ nhớ PCMCIA bạn mua thêm.
(SẢN PHẨM CHƯA ĐI KÈM)
Thông số kỹ thuật thẻ CF 256mb Swissbit

Features
Highly-integrated memory controller
Fully compliant with CompactFlashTM specification 3.0, compatible with specification 4.1
Fully compatible with PCMCIA specification
PC Card ATA Interface supported
True IDE mode compatible
Up to PIO mode 6 supported
Up to MDMA4 supported
Hardware RS-code ECC (4 Bytes/528 Bytes correction)
Fix drive (IDE mode) & removable drive (PCMCIA mode) as default configuration

Small form factor
- CFC Type I: 36.4mm x 42.8mm x 3.3mm

Low-power CMOS technology
3.3V or 5.0V power supply
Power saving mode (with automatic wake-up)
S.M.A.R.T. support in *-SMA product type
Optional Security feature: Swissbit ZoneProtection on request in *-ZP1 product type (2GB up to 16GB)
Wear Leveling: equal wear leveling of static and dynamic data The wear leveling assures that dynamic data as well as static data is balanced evenly across the memory. With that the maximum write endurance of the device is guaranteed.
Data Retention: 10 year (JESD47)

Patented power-off reliability
- No data loss of older sectors
- Max. 32 sectors data loss (old data kept)
- All data written to the flash if card status is ready after write command

High reliability
- MTBF > 3,000,000 hours
- Data reliability: < 1 non-recoverable error per 1014 bits read
- Number of connector insertions/removals: >10,000

Hot swappable in PCMCIA modes

High performance
- Up to 66MB/s burst transfer rate in UDMA4
- Sustained Write performance: up to 35MB/s (UDMA4)
- Sustained Read Performance: up to 45MB/s (UDMA4)

Available densities
- up to 32GBytes

Operating System support
- Standard Software Drivers operation CompactFlash

2 Temperature ranges
- Commercial Temperature range 0 … +70°C
- Industrial Temperature range -40 … +85°C

Life Cycle Management
Controlled BOM
RoHS compatible

#thenhocf #cfcard #thenhomaycnc #thenhocfcongnghiep #aothe #pcmcia #daudocthe #CompactFlashCard #CF128MB CF256MB #CF512MB #CF1GB #CF2GB #CF4GB #CF8GB #thenhoSwissbit #Swissbit #cfcongnghiep #cfindustria #thenhomayplc #Swissbit

Hình ảnh sản phẩm

Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử
Thẻ nhớ CF Swissbit 256MB - Compact Flash industrial Card. Dùng cho máy CNC PLC công nghiệp tự động hóa thiết bị điện tử

Giá SONGOKU
Liên kết: Nước cân bằng nâng cơ trẻ hóa da Yehwadam Myeonghan Miindo Ultimate Toner (160ml)